I've been trying to keep this in, but I can't any longer: I've had the truly amazing opportunity to go to
Ranger University. Besides getting to learn loads of
really cool techniques from a few of the best designers in the business, I've met some wonderful people who have been in the business for years. I can't even begin to describe the awe I've felt in the presence of all of these masters, but I can share a few techniques with you!!
One of the things I didn't know much about before this experience is the
Melting Pot.
I knew it melted things (go figure! hehe), but I wasn't sure how it worked and what other items it can work with. For example, did you know that you can use
Shrink Plastic in the
melting pot?!
1. It's good to work on a
Nonstick Craft Sheet. Anything that might spill is easily removable from this surface (especially with a
craft scraper!)
and you can even pour directly on to it!
2. Plug in and turn on
Melting Pot to the UTEE (Ultra Thick Embossing Enamel) setting. The pot heats up quickly. A rule of thumb: do not touch the silver parts!! They are hot. The black parts are safe to touch.

3. Cover and preheat the empty
Melting Pot for 5-10 minutes.
4. Pour in
Clear UTEE and place the lid on to allow to completely melt - this will take a few minutes and will work best with the lid on. The shallow end heats faster than the deep end (just like at the pool or beach). If you are feeling impatient, you can pull some of the unmelted
UTEE to the shallow end with your
Kool Tools spatula, but don't stir unless you want air bubbles in your finished product.

Note:
Tim said that the longer the
Clear UTEE is in the
pot, the more amber it will turn in color. This is ok, but be aware of this effect (the amber color is pretty cool for a vintage project!).
3. Time for
Shrink Plastic!
Tim suggested creating a ruler out of
Shrink Plastic so that you know what size things will end up. (Create a ruler by marking measurements on the
Shrink Plastic with a permanent marker before you shrink it - line it up with a
ruler for the measurements. Then put shrink it down to a mini ruler - this will help you decide what size piece to cut before shrinking to get the small scale that you want. Thanks for that tip,
Tim!!! Brilliant!) Cut a strip of
Shrink Plastic that fits your project.

11. Press over the image and hold in place to dry.
12.
Trim excess paper from the sides.
13. Done! Use tile as you wish! How cool is it to make a custom tile? VERY!! (or maybe I should say it's hot?)
Happy Crafting!! Thanks for the fun project,
Tim!
-Sarah
Sarah@SimonSaysStamp.com
Pin It
SUBSCRIBE TO:
This Blog | Our Newsletter
WE'RE SOCIAL:
Facebook | Twitter | YouTube | LinkedIn | Pinterest | Google+
TAKE THE CHALLENGE:
Simon Says Stamp Challenge! | Vintage Simon Says Stamp & Show Challenge