Hi bloggers! Happy Friday to you! We have arrived at our last day of
Summer School & we sure hope you've enjoyed this special feature
with extra inspiration, tips, tricks, & techniques! Be sure to
tune in Monday for all of the Summer School Blog Candy Winners!
To
celebrate the last day of Summer School and say THANK YOU for those of
you who have followed along, we'd like to offer a coupon for 20% off all
Ranger products! This sale is valid through 11:59 PM Eastern Standard
Time on June 23rd, 2013
Please use code
rangersale
When you go to check out, enter the promotion code at the bottom of the page
that says "Billing & Shipping" at the top. There will be a box for
you to enter your promotion code which will automatically deduct this
amount from your total upon check out. When entering your code please do
not add any spaces and be sure it is entered in all lower case.
We
are so pleased to have the magnificent
Paula Cheney back as a guest on
the blog to show us how to make this phenomenal Steampunk Village!
Hi again, Paula here! Super excited to share my
Steampunk Village with you today. The houses are made using the Tim
Holtz Artful Dwellings die - but I'm going to take it a step further and
make them 3-D. I made a village like this at Christmas time but when
January rolled around and the little village had to be packed up I was
so sad to take it down. So, todays alternative is for everyday use...no
packing up (at least till December). Enjoy!
(All instructions pictured left to right, top to bottom)
(1)Cut a variety of 6 x 6” papers from the back of the Tim Holtz French Industrial Paper Stash. Cut at least 4 of the 6 x 6" papers into random sized strips. Also cut 3 pieces of cardstock 6 x 8 1/2” (I am using Ranger Kraft cardstock) (2)Use a Collage Glue stick to adhere
the strips to each of the 3 pieces of cardstock, making sure they butt
up against each other but do not overlap. (3)Use a sewing machine to stitch between the papers or for you sewers out there, “stitch in the ditch”. (4)Use the Tim Holtz Artful Dwellings die, cut TWO
of the cardstock pieces as well as two matching pieces of Grungeboard.
Note: there is one rounded top house piece in this die. I used this as
a door so I only needed to cut one of them. Only the pointed top
pieces were made into houses.(5)Use a Collage Glue stick to match up the pieces and glue them together.
Once glued, place under a heavy book for 30 minutes. This will cement
the paper and Grungeboard together. (6)Since
we are making three little 3-D houses, we need sides and a roof for
each. Using the measurements below, cut 2 sides and 2 roof pieces for
each house from Grungeboard. Use a Sharpie to mark each piece
accordingly.
Big house -
sides - 2 x 3"
roof - 3 x 2 1/2"
Tall house -
sides - 2 1/2 x 1 5/8"
roof - 2 x 3"
Small House -
sides - 2 1/4 x 1 5/8"
roof - 2 x 2 1/4"
(7)Cover each SIDE piece with the remaining cardstock (do not cover the
roof pieces with paper). Each house you create should have a front and
back, 2 sides, and two roof pieces. (8)
Use 1/8" Wonder tape to put the house pieces together. Way easier than liquid glue. (9)
If there are little pieces of red thread hanging, I just covered them with extra paper bits.
(10) Time to embellish! One of the 6 x 6 papers has pictures of top hat men. I found three that I could cut out for the front of the houses. (11) Then I gathered some Idea-ology bits to choose from. (12)I started adding all the bits and pieces to the houses. So many choices that will look great with the French Industrial paper. I added a Ring Fastener door handle to the rounded piece, then used foam squares to add to the front of the big house. (13)I cut a 1/4" x 8" strip to cover the edge and cover the foam squares.
Again, I used 1/8" Wonder tape to adhere the paper to the edge of the
door. (14)
Now for the roof, Cover
each roof piece with Ranger Metal Foil Tape. Cut the piece big enough
so you can wrap around to the back. Remember the roof pieces hang off
the house a bit so you will be able to see underneath about a 1/4" on
the sides and bottom. (15)Run each set of roof pieces through the Vagabond machine using a texture fade to create a pattern in the metal. There
are so many patterns to choose from that I couldn't decide, so I made
each roof different. I went with the harlequin, honeycomb, and bingo. (16)I used Pitch Black Alcohol ink to color the metal with an Alcohol Ink Applicator and felt pad. (17 & 18)Once dry, I added several layers of Ginger over the Pitch Black, letting it dry between layers. Love, love, love this effect.
(19)Add the roof to each house with (you guessed it), Wonder Tape. I love how the Honeycomb pattern turned out. It looks almost like an old slate roof. (20 & 21) I added a Clock key to the big house roof before I put it on the house. (22)Then I had an idea. Use the Riveted Metal texture fade to make metal
patches for the houses! I spotted one place on the texture fade that
would give me the right size patch. Then layered 3 pieces of Metal Tape
and ran it through the Vagabond. (23)Cut them out, add some Alcohol ink and sand a bit to distress it and bring out the silver underneath. A patch is made. (24)Peel off the backing paper and stick it right on the house where you
like! I think I could go a little crazy making metal patches. (25 & 26)The embellishments: Remnant Rub words + cash key. (27) Add philosophy tag, mini gears, game spinner, & ring fasteners!!
Final product shot ((drum roll please))...
Well,
I hope you liked the Steampunk Village. So many versions of the
village can be made to suit your decor. And really, why stop at three?
cheers!
Shop the supplies:
-----------------------------------------------------------------------------------------------------------------------
Thanks for visiting today! We hope you enjoyed the final day of Summer School!
Blog Candy Alert! Join our following and comment on this post for a
chance to win a special blog candy! Winners will all be announced next week!
Pin It
SUBSCRIBE TO:
This Blog | Our Newsletter
WE'RE SOCIAL:
Facebook | Twitter | YouTube | LinkedIn | Pinterest | Google+
TAKE THE CHALLENGE:
Simon Says Stamp Challenge! | Vintage Simon Says Stamp & Show Challenge
